Re: Going to try Brass Binci (only plates, reeds are steel) in my Walnut Acadian
As for reasoning why brass, i have worked on & tuned a few C and Bb brass reed fitted onerows, and own Ted's old Eb now. The walnut am retrofitting i felt could benefit from the highs boost brass plate Bincis seem to bring onto the floor, compared to aluminums. The same is maybe with aluminum Salpas and Antonellies, they sound a bit brighter than Binci, probably not as loud though. - My jobbing walnut D however sounds OK as it is, and i wouldn't consider converting that one. My first Acadian is a birdseye maple C, and that one is just perfect with it's alu Bincis, as many other Acadians, Bon Cajuns and Martins i saw. Some indeed sound less alas.
- Curious about Hohner's gazzing: Jim, are you sure it's the reeds themselves? I had a lot of doings once with an old "not to mention the maker's (RIP) name here" brand using too much air it seemed, with brass bincis. Puzzling why turned out it was due sloppy and loosely fitted slides, causing internal leaking. A guitar making friend helped me there adding 1.5 to 2 mm strokes of hardwood to the sides of them, and that improved matters significantly. - Nout
Re: Going to try Brass Binci (only plates, reeds are steel) in my Walnut Acadian
The Hohner's larger bassoon reeds and bass note (the big one), use loads of air, no matter what accordion they're in. And they are very slow in response. The rest of the reeds are sweet, but they're more breakable...
You read my mind about the Walnut. It needs a bit more high end, and I'm hoping to achieve more brightness, with the brass pans. But, won't know until I actually get them in
if the whole accordion was 11% heavier it would only be half a pound
are the plates the same size though?
i have never really understood this
if the whole accordion was 11% heavier it would only be half a pound
how can a box with brass reeds be all that much heavier?
Re: if the whole accordion was 11% heavier it would only be half a pound
Brass plates are thinner, but noticeably heavier than the aluminum. I have a set of aluminum Ciccarelli reeds, which are 10.2 ounces, and a set of brass base Ciccarelli reeds, which are 18.2 ounces. But the brass based reeds are a slightly smaller dimension to match the old Salpa reeds, so not an exact comparison, but close enough to give an idea.
Dwight, both use steel reeds, the only difference is the plate the reeds are attached to.