Low humidity and dry air causes wooden parts to warp a little. Put the accordion in a humid area and that may solve your problem.

Call me at 337-684-6495 I can tell you how to fix your accordion

Thank y'all so much.
today the accordion is better. I sanded the offending hole a little. The button no longer sticks. The setting of the flappers is better also. A little shim here, a little bend here. I'm just scared of bending flapper arms. I've got a special notched tool I use on piano accordions, but this is dangerous business in the wrong hands, probably in the right hands too. Thanks John Elton Doucet for your help on the phone. I recently opened the heat vent in my practice room and this must be the cause for the problems. I'm gonna turn the humidifier up too..

Ron

Off to play a LED ZEPPLIN TRIBUTE SHOW TONIGHT. we will do Dyer maker , when the Levy breaks, and Goin to California.

Both my Savoy "F" and Miller "Bfl" developed sticking buttons that would
not return .. they'd stick down.

Both were caused by the button touching the wood around the button hole.

I "fixed" both by using a small "jeweler's file" and ever so carefully
trimming the rim of the hole towards the inside of the finger board.

I'll bet it's the cold, dry weather and contracting wood?

Too much of a coincidence!

--Big Nick

Another reason to never leave LA!

Ah Ignorance is bliss. I just bought my first button acordion (it was very cheap and from the 1800s). Most the the flappers were sticking and not seating correctly. I couldnt see a way of getting the fulcrum out so i just squirted some 3in1 oil down there and wiggled them about a bit. Seems to work, but my main concern is that the oil might go sticky with time and make things worse. I also took a pair of pliers to the connecting rods and bent them back into shape so that the flappers sealed. All seems fine so far.. but maybe i'll be a bit more careful next time.