"torrefying" has been done to musical instrument wood for at least 40 years I am aware. "Invented" in Finland.
It also involved heat them cold.
It is supposed to stabilize the wood.
I would consider it a waste of money.
I would rather spend a few cents on DELRIN. You could expect better results.
And speaking pf using modern designs and materials.. Bellows.
I was told that Larry Miller experimented with Delrin - as I understand it, he pressed delrin bushing in the rocker blocks for bearing on the axle. My late-model Bon Cajun has wood blocks without bushings, so I'm guessing this method didn't work out. Tim Reed also tried it without much success.
Possibly the solid Delrin is better than bushings. Seems like it would be simpler.
Interesting that Tim Reed tried this as he is a dyed in the wool Savoy fanboy copiest right down to the butt joints.
Butt joints are the key to the authentic Cajun sound. Picture frame joints let the treble out. Everyone knows that...
Tim apprenticed under Larry. I had given some thought to the delrin rockers after talking to Larry about his inserts. I didn't know he quit using it, he seemed happy with them when I talked to him. My one concern is I've heard delrin cannot be glued to. I didn't look into it enough to verify or disprove that.
What about stabilized wood? When that's done right it completely eliminates seasonal wood movement. I've seen some pretty substantial turning blanks that were stabilized with acrylic resin and the resin had clearly penetrated the wood entirely throughout.
I hadn't thought of that. That would probably work pretty well.
Bryan, I stand corrected on the Delrin rocker inserts. The rocker blocks cannot be inspected without complete dissassembly. I just took the keyboard off my Bon Cajun, and I can't see the axle contact, so I must have assumed that the blocks were solid wood, after diddling with the springs a while back. The key action is good year 'round, so whatever I've got is working.
Yeah, you'd have to take the rocker out of the slot to see.
I tried the delrin thing, but it was a pain, and as far as I know, I haven't had an axle seize yet.
Nedro I was about to ask you what year your accordion was made but I finish reading all the post, I was gonna say I've taking an apprenticeship with Larry for over a year now and he still uses Delrin in the rockers. Well has recently retired last July from building but he still doing repairs and tuning.. My first accordion I didn't use it, I said from now on I would. My opinion is the tolerance is tighter between axle rod and rocker than it is between rocker fingerboard. So to me if you gonna have any swelling the axle rod would be where to go the extra mile. Also Delrin is inexpensive. But on the other hand I haven't experienced any sticking so I havent decided if its worth it or not. Does anyone know if any other builders have use it?