There are many transducers on the market for everything from pianos to guitars to trumpets. B Band is my favorite for acoustic guitar.
I'm sure I'm not the first to think about this but I was wondering why I haven't seen anything about someone trying it. One trans on the treble side, one on the bass side. Both going to a TRS 1/4" sealed jack. Use a TRS cable. Then to an outboard stereo preamp/EQ/mixer/blender mixed to mono, then a DI then straight to the console. It seems to me that this would be an excellent reproduction system. Clean, natural signal with the ability for bass reproduction as well as treble. Maybe feedback is a problem? I don't think it'd be worse than a mic.
Thanks Nick. I found one in my junk box. I picked it up 20 years ago. I knew I would need it someday. I also found a headset from WWII I had saved.
One man's junk is another man's junk.
Craig
The jacks appear to be standard phone jacks, but they are not. They are the sealed variety. They cost more (can't remember exactly, maybe it was around $10?), but they don't leak air. Leaking would be a bad thing.
The one I had in the ole junk box is a commercial sealed, rectangular black plastic enclosed jack. The panel thickness dimension = Panther wall thickness. I drilled and tapped and then hardened the threads with C.A. It threads tightly. The element is from an Audio Technica I found laying around. Sounds pretty good!
Craig,
I use . what is called, a "1/4" flush mount jack".
They are sealed and do not leak air.You can find them in most music stores. I know Peavey offers them as an accessory item. You can also order them from music supply companies. Carvin has them listed in their magazine. They run about $12 at the store, about $6 if you order them.
Jude
Hi ya'll,
when I plug a cord into my jack, the signal cuts in and out. Do the jacks wear out? Is it common?
I generally use a wireless airline guitar transmitter which is about as big as your thumb and does not cause any problem, probably because there is no side pull.