Claude,

I have an Acadian Accordion with mitered corners. It was built about 39 years ago.

All I know is that Marc's more modern version plays a lot better.

Now, about historical qualities: I have one of those old German models with the mitered corners- like a picture frame- and after my wife knocked it off the piano with her broom, these mitered corners leak air.

Had they been "butt joints" I think they may have been sturdier. Who knows?

Being an engineer, I know. Butt joint. A mitered edge has 33% more surface area for gluing, but over 60% more area of open end grain. The end grain should first be filled with hot hide glue and dried. Sand the light fuzz off and glue up. Splines or biscuits will stenghthen the joint. Most folks just glue them up. I prefer hide glue. It has hundreds of years of use and stands the test of time. Alaphatic resin(yellow wood glue) and polyvinyl acetate glue(white elmers) have only 50+ years with mixed results depending on application.

It's beerthirty

hey Craig,

My Art Framer uses most of the time ,splines, witch would be feasible on a mittered corners 1 row.

I'm looking at one of the frame now and after measurements , it measures 3/8"x 1 1/4", so there is plenty of room, it seems to be able to do it on a 1 row frame.

Each corner has 2 splines .

Looks good, meticulously done, craftsmanship like.

The splines are easy to make with a table saw and the proper homemade gig.

Off course the're made after the joint is glued.

Claude, PS: The splines will be hidden by the corner brackets, anyway.

Beerthirty. You barley-lovin' Braves have convinced me to knock off work early and start poppin' tops. Plus, it's my last weekend as a single man! That means starting this Tuesday eve, you'll be R!CK-free for a few weeks here on the ol' board. So git yer last minute jabs in before ya'll done thunk I quit'cha! Never... I've made some great friends here!

Now, back to those corners and joints. Why can't accordions be oval shaped?

R!CK

So'you're getting married? I'll play you a wedding march, and drink a beer!!! Where is your honeymoon trip going?

Quite the same crossed my mind, why not rounded 'corners'like the old antroposophes would recommend? In Holland we even have tampons with a rounded top . And roundabouts where used to be crossings.

Hope you will have time to contribute in the future

Gus

Thanks, brutha! Yeah, I'm ready, me. I've got a golden gal from Lake Charles. Totally likeminded -- we're peas in a pod. Gonna seal the deal and whisk her off to St. Vincent & the Grenadines. When I get back, I'm recording more tunes for our CD. We've got 7 tunes down and at least that many more to go. Dropping the first 7 off this week at MTE for mix and mastering.

So lots of stuff going on, but I'll be around a few more days!

'Preciate'cha!

R!CK

I'll buy your cd as soon as it is ready. OK?

Then I'm gonna make some copies for the beerglasses to put on and drink on the health of you two!.

Gus

Right on Gus! I'll get back to ya on that! In a few weeks I'll probably have some sample tunes on my website(s). But we still need another handful of tunes before calling it a "full" release.

Cheers backatcha!

R!CK

Congrat`s Rick, we`ll have a sixpack on you,
Are you sure you want tot do this?


I think accordions aren`t oval shaped `cause they keep falling off your knee when you play them


Wilfred

Isn't that what straps are for?